Saturday 13 May 2017

Carbon Fibre Reinforced Polymer Aircraft and Engine Parts

Carbon fibre reinforced polymer (CFRP) is still a relatively new material in the aerospace industry. It consists of a structure of carbon fibres bound together with a thermoset resin or plastic, which gives it an extremely high strength-to-weight ratio. Lighter than aluminium, stronger than iron, and with a higher elasticity than titanium, it is no wonder that a lot of airlines now use CFRP parts in the airframe, including the Boeing 787 Dreamliner. Its resistance to strain and abrasion makes it ideal for withstanding the forces during repeated take offs and landings, and its low shrinkage and expansion against heat is exploited in aircraft brakes to absorb considerable quantities of energy rapidly without mechanical failure or seizure (CIEC Promoting Science, 2013).

In 1995, GE Aviation introduced the first airline engine to feature carbon fibre components. The fan blades in the front turbine of the GE90 were made out of CFRP, which are twice as strong and one third the weight of generic titanium blades (GE Aviation, 2015). They have now opened a second factory in Mississippi to produce CFRP parts for two new engine programs, including manufacturing fan platforms for the LEAP engine that is expected to reduce the fuel consumption of the Airbus A320neo by about 15% (Sloan, 2016).

There are, however, a number of limitations to CFRP, mainly due to how new the technology is. A number of aircraft that use CFRP parts have experienced delays with delivery dates due to the relatively new processes used to make them; metallic structures, on the other hand have been studied and used on airframes for years and the processes are relatively well understood. Another disadvantage is the price - it is very expensive. And this expense can increase due to the need for a mould to create a sufficient product. Making a mould is not always easy and often requires the help of a specialist to produce (Zhou, 2004). Also, when the material breaks, the material can disintegrate into a number of fractured pieces, which can cause some unpredictable results. (Caterham Group, 2016).

A lot of research still needs to be done on CFRP composites before they can be used in more engine components. There are further studies still being carried out on new carbon fibre composites, such as polyether ether ketene (PEEK) and carbon nanotube reinforced polymers (CNRP), but due to the high temperatures of engines, it is so far doubtful that carbon fibre composites will be used beyond the fan blades of engines.



References

Caterham Group. (2016, March). Fiber Reinforced Composites. Retrieved from Enlighten: http://altairenlighten.com/in-depth/fiber-reinforced-composites/
CIEC Promoting Science. (2013, March 18). Composites. Retrieved 2016, from The Essential Chemical Industry - Online: http://www.essentialchemicalindustry.org/materials-and-applications/composites.html
Cox, B. (2010). FADEC Comes Of Age. Retrieved from Plane & Pilot: http://www.planeandpilotmag.com/article/fadec-comes-of-age/#.WGBUsTug_IV
GE Aviation. (2015). The GE90 Engine. Retrieved 2016, from GE Aviation: http://www.geaviation.com/commercial/engines/ge90/
Kellner, T. (2015, February 9). Ceramic Matrix Composites Allow GE Jet Engines to Fly Longer. Retrieved from GE Reports: http://www.gereports.com/post/110549411475/ceramic-matrix-composites-allow-ge-jet-engines-to/
Moir, I., & Seabridge, A. (2001). Aircraft Systems. London: Professional Engineering Publishing.
NASA. (2015, May 5). Turbofan Thrust. Retrieved from NASA: https://www.grc.nasa.gov/www/k-12/airplane/turbfan.html
Penner J.E., L. D. (1999). Aviation and the Global Atmosphere. Cambridge: Cambridge University Press.
Sloan, J. (2016, February 8). GE Aviation, Batesville, MS, US. Retrieved from Composites World: http://www.compositesworld.com/articles/ge-aviation-batesville-ms-us
Smith Kilkenny, K. (2016, August 31). Ceramic Composites Revolutionize Engine Efficiency. Retrieved from NASA: https://www.nasa.gov/feature/ceramic-composites-revolutionize-engine-efficiency

Zhou, M. (2004). A Comprehensive Process for Composite Design. California: Altair.

Friday 17 February 2017

Systems Engineering in the Aerospace Industry

Systems engineering is a critical part of any project in the engineering industry; whether it’s manufacturing one simple component or designing a complex product such as a car or aircraft. Well-established organisations such as NASA and BAE Systems stress the importance of systems engineering in order to meet requirements and succeed in missions and projects. But what is systems engineering exactly, and what role does it play in the Aerospace industry?
In order to answer this question, consider what a system is. According to MIL-HBK-338B Electronic Reliability Design Handbook, a system is:
“A composite of equipment and skills and techniques capable of performing or supporting an operational role, or both.” (Department of Defence, 1998)
A system doesn’t necessarily have to be as complex as a vehicle or computer, and it can be part of a larger more complex system. It doesn’t even have to be manmade; the Solar System is a natural example of a system, while the brakes on cars are a system on its own that contributes as part of a larger system. A system is an assembly of components that work together to process an input to create an output.
Systems can be split into a number of smaller systems and subsystems that specialise in different areas to ensure that the overall system conforms to its requirements and specifications. A hierarchy of these systems can be drawn up to split the requirements of the major system into smaller and more manageable components that can be distributed amongst these specialised subsystems.
Figure 1 - Example of a hierarchy of systems. (Moir & Seabridge, 2013)
Figure 1 - Example of a hierarchy of systems. (Moir & Seabridge, 2013)
In order to ensure that all the components will work together in the overall system, a lot of communication and integration between subsystems is required. This is where systems engineering comes in. Systems engineering is described by the International Council on Systems Engineering (INCOSE) as:
“An interdisciplinary approach and means to enable the realization of successful systems. It focuses on defining customer needs and required functionality early in the development cycle, documenting requirements, then proceeding with design synthesis and system validation while considering the complete problem.” (INCOSE)
Systems engineering is “holistic and integrative” and bridges the gap in communication between the different subsystems “to produce a coherent whole” (NASA, 2009). Whereas subsystems are specialised and focus on one area of the major system, systems engineering is more generalised and takes a more goal-centred approach, looking at the bigger picture to ensure that the subsystems come together effectively to produce the final major system within a deadline and budget.

Systems Engineering in Aerospace

Organisations in sectors such as automotive and aerospace find systems engineering especially useful to identify alternative solutions, prevent any unforeseen problems, and ensure the customer is satisfied with the quality of the finished product. Furthermore, INCOSE state that “effective use of systems engineering can save over 20% of the project budget” (INCOSE, 2009). Systems engineering software now allows companies to test concept models against the customer requirements through virtual simulations, and produce documented safety evidences for assessments from certification bodies such as the Civil Aviation Authority (CAA) (3dsCATIA, 2011). This helps reduce waste in materials from testing prototypes, modifications and possible scrapping, and makes the process from concept to product much faster and more efficiently.
A systems engineer’s aim is to help the customer to properly understand the problem at hand and prepare solutions to the problem for the customer to select from. The systems engineer can then lead and guide the different departments of the project team towards the goal of implementing this solution, by starting with the desired output to determine the required inputs and then constantly referring back to the customer requirements to ensure the final system conforms to its specifications. To this a systems engineer needs to have a number of different skills and traits including:
  • A broad technical competence - systems engineers require a fundamental understanding of most, if not all, of the different subsystems, and a desire to learn more about these areas;
  • An appreciation of the value of process and overall objectives that need to be met to reach the end goal, and the ability to address these objectives to the subsystem teams;
  • A self confident leader, but also a strong and assertive team member - Harold Bell from NASA Headquarters suggests that "a great systems engineer completely understands and applies the art of leadership and has the experience and scar tissue from trying to earn the badge of leader from his or her team" (NASA, 2009);
  • Problem solving and critical thinking skills;
  • Exceptional communication and active listening skills and the ability to make system-wide connections;
  • The ability to take a goal-centred approach as opposed to a technical or chronological insight - a systems engineer looks at the output to determine the required inputs for a project and needs to be able to see the bigger picture, only focusing on the smaller details when needed;
  • Comfortable with change and uncertainty - according to NASA, systems engineers need to understand and encourage quantification of uncertainty in teams in order to design a system which accommodates these uncertainties (NASA, 2009);
  • Creativity and engineering instinct in order to find the best way to solve a problem while appreciating the risks and implications;
  • Proper paranoia - expecting the best, but thinking about and planning for the worst case scenario as a precaution.
A few of the behavioural characteristics of a systems engineer can be summarised into one attribute: systems thinking. Systems thinking was first founded in 1956 by MIT professor Jay Forrester, who recognised the need for better methods of testing new ideas about social systems, in a similar way that ideas in engineering can be tested (Aronson). Systems thinking is a set of general principles that enables people to understand and manage social systems and improve them.
The systems thinking approach is fundamentally different to traditional forms analysis. For one thing traditional analysis focuses on reductionism - reducing parts of the major system (also referred to as holons) to ever decreasing components (Kasser & Mackley, 2008). In contrast, systems thinking looks at the bigger picture and how the system or part interacts with the other holons, and recognises loops and relationships between the holons. This can often result in markedly different conclusions to those generated from using traditional analytical methods, but it can also help in determining the emergent behaviours of holons and the possibility of unwanted outcomes - expecting the unexpected. By taking these steps it becomes easier to identify new and more effective solutions to complex and recurring problems, while also improving coordination within the organisation.
In industry, systems engineers are required to work with a number of different stakeholders, each with their own perspective for the design and development of the product required. For example, if an aerospace organisation were to look into the concept development of a new civil aircraft, there would be a wide range of stakeholders in question, including suppliers of materials and services, passengers and air crew, and certification authorities, as well as the engineering team directly involved with the project. Figure 2 shows the typical stakeholders in a civil aviation system, splitting them into four main system interfaces: socio-economic, regulatory, engineering, and human. By identifying these interfaces, systems engineers are able to plan when interactions with particular systems are required and simplify development and operations, documenting the process throughout.
Figure 2 - Typical stakeholders in a civil aviation system. (Moir & Seabridge, 2013)
Figure 2 - Typical stakeholders in a civil aviation system. (Moir & Seabridge, 2013)
Each stakeholder is interdependent with others in the same interface. For example, when applying for a type certificate a number of prototypes have to be produced to undergo different tests and a maintenance program has to be put together to support continuous airworthiness after approval of the design. This is submitted along with the test results of the prototype to the regulators who – if satisfied with the safety, health and environment aspects of the prototype – approve the prototype and the airworthiness authority grants a type certificate (MAWA, 2014). Further regulations then have to be conformed to in order for the aircraft to keep its type certificate and Certificate of Airworthiness or it will be deemed unsafe to fly. Systems engineers therefore have to understand the regulations the aircraft has to conform to throughout its life and plan methods to maintain it at an airworthy standard.
A systems engineer's job does not finish once the concept has become a product. They then have to work with a maintenance team to keep the product safe and able to use until it retires from service. Figure 3 shows the life cycle of an aircraft from the point of view of the Civil Aviation Authority (CAA) and the way in which systems engineers and product managers in aeronautical would have to work with the CAA throughout the life cycle.
Figure 3 - Life cycle of an aircraft (The Civil Aviation Authority of New Zealand, 2009)
Figure 3 - Life cycle of an aircraft (The Civil Aviation Authority of New Zealand, 2009)

Conclusion

Systems engineering is "a crucial core competency" for success in the aerospace industry. It is first and foremost about managing complexity to get the right design, and then maintaining and enhancing its technical integrity (NASA, 2009). According to NASA administrator Michael D. Griffin in his 2007 presentation, Systems Engineering and the 'Two Cultures' of Engineering, systems engineering helps to provide a balance of all the subsystems to combine into a system that will proceed past the preliminary design phase and thus accomplish the customer requirements it was explicitly designed for (Griffin, 2007).
By looking into the concept development of a civil aircraft and considering the different stakeholders and system interfaces involved in the lifecycle of the aircraft, whether directly or indirectly, it is evident that systems engineers have a extensive array of responsibilities and perspectives to manage outside of the engineering system that continue to be addressed and managed even after the preliminary design phase has been completed. By ensuring that they fully understand the extent of the end goal of the final product, and appreciation the impact it will have on the different stakeholders, systems engineers are able to determine the inputs required to reach these targets within the deadlines and budgets situated.
Although systems engineering may take different forms depending on the industry and the preferences of the organisation, the underlying methods utilized remain consistent and the aim remains the same: to find the best design to meet the requirements. In any engineering project there will be a number of specialised subsystems that need to be brought together to ensure that the end result of the project fulfils its specifications to the best of its ability.

References

3dsCATIA. (2011, September 30). What is "Systems Engineering"? | Elementary collection. Retrieved from YouTube: https://www.youtube.com/watch?v=Eap9kmIz_6k
Aronson, D. (n.d.). Overview of Systems Thinking. Retrieved 2016, from Thinking Page: http://www.thinking.net/Systems_Thinking/OverviewSTarticle.pdf
Department of Defence. (1998). MIL-HBK-338B Electronic Reliability Design Handbook. Virginia: Defense Quality and Standardization Office.
INCOSE. (n.d.). What is Systems Engineering? Retrieved 2016, from INCOSE UK: http://www.incose.org/AboutSE/WhatIsSE
INCOSE. (2009, March). zGuide 3: Why invest in Systems Engineering? Retrieved from INCOSE UK: http://www.incoseonline.org.uk/Program_Files/Publications/zGuides_3.aspx?CatID=Publications
Kasser, J., & Mackley, T. (2008). Applying systems thinking and aligning it to systems engineering. Cranfield: Joseph E. Kasser.
Moir, I., & Seabridge, A. (2013). Design and Development of Aircraft Systems (2nd ed). Chichester: John Wiley & Sons Ltd.
NASA. (2009). The Art and Science of Systems Engineering. NASA.

The Expansion of Heathrow Airport - Good or Bad?

Plans to expand Heathrow have been debated for over a decade, delaying a potential increase in the UK’s economy and increased frequency of flights. In June 2001 Labour ministers were said to be seriously considering building a third runway at the west London airport, “to relieve increasing congestion in London and the South-east and to prevent the airport from losing its premier status as Europe's leading international airport” (Harper, 2001).

According to a new study by the British Chambers of Commerce (BCC), building a new runway at Heathrow would add about £30bn to the UK’s economy. Taking into consideration a number of scenarios including the frequency of flights to current international destinations and flights to new international destinations, the immediate-term economic impact of increasing capacity at Heathrow would deliver between £8.6bn and £12.8bn in increased productivity; approximately 58% of which would apply to outside of London.


Table 1 - Economic impact of additional capacity at Heathrow – sensitivity test results (£m, present value, over 60 years) (Buchanan, Buchanan, & Siraut, 2009)


The study also states that approximately £20bn would be added to the economy in longer-term, wider economic benefits. This includes an increase in productivity due to more frequent flights and shorter waiting times for transfer flights outside of the UK, and an increase in direct and indirect employment which - according to the Department for Transport (DfT) - would result in an additional 10,000 jobs at the airport (Transport, 2009).

However, oppositions are concerned about the increase in noise and air pollution that residents living around the airport would have to endure, as well as the vast amount of people who would be rendered homeless as a result of making room for the terminal and runway. Plans for a third runway at Heathrow call for the destruction of around 700 homes at the minimum, not including properties that would need to be destroyed for access roads and road widening. In a House of Commons debate in December 2007, John McDonnell argued that "4,000 homes could be affected either by demolition or by being rendered unliveable" (Parliament, 2007).

According to an analysis carried out by Travel for London and the CAA, an additional runway would expose more than 1.1 million people to noise in excess of 55dB annually on an average 24/7 basis, compared to 725,100 people today (CAA & ERCD, 2014). The World Health Organisation (WHO) considers any noise above a level of 50dB to be problematic.

The Greater London Authority (GLA) stated in a study that "even without a third runway areas around Heathrow are already in breach of European Union (EU) air quality limits" (GLA, 2010). Air pollution can cause significant health problems to those exposed for long periods of time, aggravating respiratory and cardiovascular conditions, and even contributing to premature death.

It seems obvious that expanding Heathrow airport would be impractical and extremely damaging to residents living close to the runway. It would therefore be more realistic to consider other areas of the UK which may be suitable to not necessarily be expanded, but be used to distribute some of the flights from Heathrow to relieve the congestion and knock-on delays caused by the capacity at which the airport is working.



References

Buchanan, P., Buchanan, C., & Siraut, J. (2009). Economic Impats of Hub Airports. London: British Chambers of Commerce.

CAA, & ERCD. (2014). Aviation Noise Modelling: Heathrow Options. London: CAA.

GLA. (2010). Flights of Fancy: Can an expanded Heathrow meet its environmental targets? London: Greater London Authority.

Harper, K. (2001, June 25). Heathrow in line for third runway. Retrieved 2015, from The Guardian: http://www.theguardian.com/uk/2001/jun/25/transport.politicalnews

Parliament. (2007, December 12). Column 104WH: Heathrow Expansion. Retrieved from www.parliament.uk: http://www.publications.parliament.uk/pa/cm200708/cmhansrd/cm071212/halltext/71212h0006.htm

Transport, G. B. (2009). Adding capacity at Heathrow Airport: Impact Assessment. London: Department for Transport.

WHO. (2011). Burden of disease from environmental noise: Quantification of healthy life years lost in Europe. UN City: WHO Regional Office for Europe.

Thursday 4 September 2014

28th June 2014: Scarborough Airshow

Large numbers of people came to see XH558 at
Scarborough Armed Forces Day.
Armed Forces Day at Scarborough proved to be another successful air show on Saturday. Although cloudy, the weather was comfortably warm, and crowds quickly formed along the promenade for the event.

The day was opened with a march from the Royal Corps of Signals and 1Bn Yorkshire Regiment Freedom Parade and a beautiful speech from the Mayor of the Borough Scarborough, Cllr Patricia Marsburg, commemorating all those who sacrificed their lives for their country. This was then punctuated by a lovely flypast from the Lancaster bomber and two Spitfires, followed by a flight and landing from the Sea King.

The crowds grew bigger as the time crept closer to XH558’s display. The air was thick with anticipation as it finally came to 2:15pm. Flown by Jonathan Lazzari, Bill Ramsay and Phill O’Dell – and with a commentary from Martin Withers – 558 performed a breathtaking display, leaving spectators amazed and wild with excitement.

XH558 flies over the lighthouse at Scarborough Airshow.

After the display I went to the Vulcan to the Sky Trust mini-village, which was already packed with people chattering about the display. I asked a few to give me a word or phrase to describe what they thought about the display; here are some of them:

“Amazing.”

“Loud.”

“Noisy.”

“Breathtaking.”

“Awesome.”

“Bloody brilliant.”

“Fantastic.”

“A beautiful display.”

It never ceases to amaze me how adored this machine is. Apparently the numbers who attended this year’s air show were about the same as they were last year when the Typhoon and the Red Arrows had flown, showing that the love for our lady Vulcan is timeless. She is an old aircraft, and yet at every air show the same question is asked over and over again: “When is the Vulcan flying?”

Our next air show is at Waddington this weekend, where I’m sure she will give another amazing display.



This article was published in the Vulcan To The Sky Newsbytes on the 1st July 2014.

15th June 2014: Wellesbourne Wings and Wheels event with XM655

Fathers Day was unforgettable for those who went to the Wellesbourne Wings and Wheels annual event. There was a fantastic turnout for XM665, which has been looked after by the 655 Maintenance and Preservation Society (MaPS) since 1984. To celebrate the 30th anniversary of her stay in Wellesbourne – and 50 years that she has existed – spectators were treated to two high speed taxy runs, not to mention a beautiful display from the Battle of Britain Memorial Flight Dakota and the Large Model Vulcan XH558. The day wasn’t just for aircraft fans though, with an impressive exhibition of motorbikes, classic cars and military vehicles as well.

XM655 raises her front wheel just before the power from the Olympus 301s is reduced.
During the taxy demonstrations, masses of people hurried to crowd the fence to watch 655, following her around the runway as she progressed. It’s heart-warming to witness how loved by the public the Vulcan still is.



This article was published in the Vulcan To The Sky Newsletter on 20th June 2014.

22nd June 2014: Weston-Super-Mare Airshow

"Well worth the wait": XH558 performs a beautiful
display at Weston-Super-Mare.
Armed Forces Day at Weston-super-Mare proved to be another successful air show last weekend, with XH558 closing the event with a breathtaking display.

Crowds of over 120,000 spectators quickly formed along the promenade for the event, which was filled with some marvellous displays, and performances from gymnasts, singers and many other acts in the arena.

Unfortunately, due to some mechanical problems with the hydraulic system – which were quickly solved by our engineering and logistics teams – not to mention some minor issues with refuelling, XH558 was delayed by 30 minutes, and thus was unable to take part in the Big Jet Formation alongside the Venom and the Canberra.

Again, the public demonstrated the amount of respect and loyalty they have towards XH558, and the majority of spectators appeared unfazed by the delay; they were merely relieved that she was going to fly. And at about 5:30pm, the patient audience were rewarded with yet another outstanding display from their beloved aircraft.



The Vulcan mini-village was located close to the arena and was swarmed soon after the display to talk about the display. It was described by many to be “well worth the wait”.

8th June 2014: Cosford Airshow

The first airshows of the season have proved successful with XH558 appearing at Welshpool and Cosford this weekend.

At Cosford the sun shone brightly on the Vulcan mini-village, and the M54 was congested with a large amount of traffic trying to get onto the airfield. The 'Vulcan Effect' was in full swing once again.

Since I am used to attending the small airshows in Blackpool, I was rather overwhelmed by the large numbers that came to see the Vulcan; at least 50,000 in total. Throughout the day Richard and I were bombarded by excited fans asking us what time the Vulcan will be flying and how she is, as though she is a living being. It was only then that I started to get a true glimpse of how loved this aircraft is.

The crowds were treated to a number of spectacular displays, including performances from the Red Arrows and the Typhoon, as well as a debut formation from the Canberra and the Hunter. Then it was time for XH558 to take to the skies. The delta-wing aircraft looked as elegant as ever as she flew over the spellbound crowd, the aircrew - Kev Rumens, Bill Ramsey, Jonathan Lazzari and Phil Davies - doing her first flight of the season justice. Afterwards I was able to speak to Carol Vorderman, a big fan of the Vulcan, who commented that she looked "beautiful as always".


XH558 wows the crowd at the first airshow of the 2014 season.
As my first air show of my internship with Vulcan To The Sky Trust, I began to realise and appreciate the amount of work that is put in by this charity to keep such a beautiful and meaningful piece of history in the air. Costing £2.2million a year, XH558 proves to be a very expensive mistress. However, with the love and admiration the public feel for her, it is no wonder that nearly seven years since her first post-restoration flight she is still in the sky, wowing her many followers.